Digi-Star Cab Control 2000/V - Manual (Page 3)

Operators Manual
D3660 1
The Cab Control allows the loader operator to communicate via radio signal to any
properly equipped EZ indicator. Once in contact with an indicator, the Cab Control allows
the loader operator to view the indicator display and control the indicator by pressing
buttons on the Cab Control front panel.
Mounting
Metal structures surrounding the indicator and the Cab Control may block the radio signal.
The Cab Control is designed to work with the EZ indicator mounted inside the cab of a
truck or tractor and the Cab Control mounted in a loader or tractor cab at dashboard level
or above.
Connecting Power
Power can be obtained directly from either a 12 Volt or a 24 Volt electrical system or for
stationary applications, from a 120VAC to 12VDC power cube that plugs into a wall outlet.
Warning! Disconnect the Cab Control power cord before
jump-starting or fast-charging the battery.
Connect the RED wire from the power cable to 12VDC or 24VDC and the BLACK wire to
GROUND. The Cab Control is fused internally at 2 Amps but typically uses less than 0.20
Amps.
Wire Color Wire Function
RED Battery (+12VDC)
BLACK GROUND