Digi-Star TMR Tracker User Manual - Manual (Page 10)

D3601 Rev. E
10
Step 6
Enter Driver Data. Click on the Driver icon.
This will display the Driver Data screen:
Enter the operator’s full name. Assign that operator a User Code. Please use a single number as the User
Code as this is the easiest to enter at the scale. When done, click Save. Click New to add additional
operators.
Step 7
There are two ways to process the pen feeding data: Loads mode (Standard) and List
Mode (Advanced)
To select this option, go to the Systems dropdown menu, Default Settings, Data Transfer
Tab and select between Loads or List mode.
Step 7.1 Loads Mode
Loads mode functions by TMR Tracker combining pens with the same recipe to make a complete load.
Then at the EZ3500 or EZ4300 the operator select the group of pens in a load to build.
Send Data. Click on the Send Data icon.
This will display the Calculate Feeding Loads
screen: