Dukane Projector 8110H - Manual (Page 44)

44
OPTION menu
Item Description
MY BUTTON
This item is to assign one of the following functions to the MY
BUTTON 1/2 on the remote control (6).
(1) Use the ▲/▼ cursor buttons on the MY BUTTON menu to select
a MY BUTTON - (1/2) and press the ► cursor (or the ENTER)
button to display the MY BUTTON setup dialog.
(2) Then using the ▲/▼/◄/► cursor buttons sets one of the
following functions to the chosen button. Press the ENTER (or
the INPUT) button to save the setting.
• COMPUTER IN1: Sets port to the COMPUTER IN1.
• COMPUTER IN2: Sets port to the COMPUTER IN2.
• S-VIDEO: Sets port to the S-VIDEO.
• VIDEO: Sets port to the VIDEO.
• INFORMATION: Displays the INPUT_INFORMATION (46) or
the SYSTEM_INFORMATION or nothing.
• MY MEMORY: Loads one of adjustment data stored (28).
When more than one data are saved, the adjustment
changes every time the MY BUTTON is pressed.
When no data is saved in memory, the
dialog "No saved data" appears.
When the current adjustment is not
saved to memory, the dialog as shown in
the right appears.
If you want to keep the current adjustment, please press
the ► cursor button to exit. Otherwise loading a data will overwrite
the current adjusted condition.
• PICTURE MODE: Changes the PICTURE MODE (24).
• FILTER RESET: Displays the filter time reset confirmation dialogue
(43).
• TEMPLATE: Makes the template pattern selected to the
TEMPLATE item (40) appear or disappear.
• AV MUTE: Turns the picture and audio on/off.
• D-ZOOM: Turns the D-ZOOM mode on/off. When the D-ZOOM
mode is on, use the ▲/▼ cursor buttons to adjust the
magnification ratio.
• D-SHIFT: Turns the D-SHIFT mode on/off. When the D-SHIFT
mode is on, use the ▲/▼/◄/► cursor buttons to move the
magnifying area.
• RESOLUTION: Turns the RESOLUTION menu on/off (33).
MY SOURCE
U sing the ▲/▼ cursor buttons selects the picture input port to be
selected with pressing the MY SOURCE/DOC.CAMERA button on
the remote control.
Select the picture input that is connected with a document camera.
COMPUTER IN1 ó COMPUTER IN2
VIDEO ó S-VIDEO
(continued on next page)