Digi-Star Case IH 1250 - 12/16/24 - Manual (Page 9)

Scale Kit Mounting Installation - 24 Row
D3870-US Rev B Case IH Planter Scale 7
SCALE KIT MOUNTING INSTALLATION - 24 ROW
The Case-IH-24-Row Scale Kits requires mounting four load cells. The illustration below highlights the location
of each load cells.
1. Remove the one U-bolt on
the bracket which sits
between the steps and the
main planter frame on the
rear of the planter.
2. Loosen the U-bolts on the
front leg bracket located
between the front of the
hopper and the main frame.
3. Loosen the bolt on the two
left brackets that are located
under the catwalk.
4. Remove the bolts on the two
right leg brackets.
5. Lift up the two right legs
about 1-1/2”.
IMPORTANT: The lift
chains, bucket attachments,
loader/skid steer, winch or
jack must be capable of
lifting and controlling 1000
lbs.
Right/Left Load Cell Bracket