Digi-Star SW600 - Manual (Page 8)

SW600
DETERMINING THE NEW CAL NUMBERS
1. Press and hold to zero
balance the scale.
2. Place a known weight on the
scale (Example: 1000 LB test
weight).
Perform the following calculation to find the new calibration number:
3. Press and hold and
to enter setup menu.
4. Press to select Custom (see
page 7).
5. Press indicator will display
SETUP
followed by the setup
number.
6. Setup number does not change.
7. Press to advance to “Cal”.
8. Enter the new CAL # by
pressing to change the
value of "flashing" digit and
to select which digit of display is
flashing.
9. Press to store new
calibration number.
1
3
0
setup
4
5
7
3
8
9
2
8 D3656