Digi-Star EZ400 - Manual (Page 22)

Short Form Calibration
18 EZ400 User’s Manual D3655-US Rev E
Calibrating Scale For Maximum Accuracy
Note:
To accurately calibrate scale, you need a large amount of weight that
has a known value. For best results you should have at least as much weight
as largest load you plan to weigh.
Determining New Setup and
Calibration Numbers
The setup number does not change.
1. Press to Zero-Balance. See
page 5.
2. Put KNOWN WEIGHT on scale
platform and write down WEIGHT
DISPLAY.
Perform following equation to find
ACCURATE CAL #.
1