Digi-Star SLC 2400 - Manual (Page 7)

Operation
D3924 SLC 2400 Operator’s Manual 7
OPERATION
Power to the Scale Link Control (SLC 2400 is provided from the Scale
Link 100, 200 or 300. The on and off switch on the front panel of the
SLC 2400 cannot turn power on or off.
Systems with Multiple
Scales (Optional)
Some Scale Link systems have
two or three separate scales
combined into one system. Use
the following procedure to display
the scale of your choice.
Zero Balance Indicator
1. Repeatedly press until
SCALE
appears on the display.
2. Press to increment through
the available scales on the
system.
1. Press and hold for 3 seconds
to zero balance indicator.
2. Flashing arrow points to gross next
to the display window, scale ready
to weigh.
1
2
0
SCALE
1
2