Directed Electronics XA-6004 - Manual (Page 7)

7
© 2006 Directed Electronics—all rights reserved
2-CHANNEL XA-3002/XA-6002
HI-INPUT
R
L
INPUT
FULL
HPF LPF
X-OVER LEVEL BASS HI PASS
12dB 0dB
6dB
LOW PASS
500Hz 50Hz 500Hz 50Hz
90 90
0.8 3
1.5
0.15V 5V
PRT PWR
1 2 3 4 5 6 7 8 9
INPUT WIRING DIAGRAM—XA-3002/XA-6002
1. PPW WRR (LED blue) - when illuminated
indicates that the amplifier is on.
2. RRCCAA IInnppuuttss (front) - accepts RCA input
from a source unit, preamplifier, or
equalizer.
3. LLeevveell CCoonnttrrooll (front) - continuously
adjusts from 250mV to 5V for full
power output.
LLoow w--PPaassss FFrreeqquueennccyy CCoonnttrrooll (front) -
adjusts the frequency
(50Hz–500Hz) of the low-pass
crossover.
HHiigghh--PPaassss FFrreeqquueennccyy CCoonnttrrooll (front) -
adjusts the frequency
(50Hz–500Hz) of the high-pass
crossover.
4. HHII IInnppuutt (high level input) - Accepts
1v to 10v input from the headunit’s
speaker output. The amplifier will
automatically wake-up when the
input is greater than 1V.
5. LLeevveell CCoonnttrrooll (rear) - continuously
adjusts from 250mV to 5V for full
power output.
NNOOTTEE:: The numbers listed below are referenced on the Input Wiring Diagram.
FRONT PANEL CONNECTIONS/CONTROLS—XA-6004