Digi-Star Cab Control 2.4 - Manual (Page 6)

Cab Control 2.4
4
Setting-Up the Indicator
The Cab Control 2.4 is compatible with any indicator
equipped with a second generation 2.4 GHz radio product. It
is not compatible with legacy 2.4 GHz radio products
utilizing the 2.4 GHz XStream radio (FCC ID: OUR-
24XTREAM).
The EZ indicator being used with the Cab Control 2.4 will
have one of two radio options:
1) An internal factory-installed and configured radio that is
assigned a unique scale number (
).
2) An ERM 2.4 external radio installed on the J905 serial
port.
NOTE: Two indicators cannot operate using the same scale
number. For best performance on systems with six or
less indicators, use scales numbered 1 - 6.
To set up the indicator for use with the Cab Control, adjust
the following menu settings:
For internal radios:
- Select –
(DAN# 231)
For external radios:
-
(DAN# 229)
- Select –
(DAN# 231)