DFI CA331-NR - Manual (Page 70)

70
3
BIOS Setup
Hardware Health Configuration
This section is used to configure the hardware monitor function.
Fan configuration
mode setting
Enabled for Case Open
Detection. If Case
has been opening.
System will show
warning message and
beep warning.
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Hardware Health Configuration
Current System Temp
Current CPU Temperature
System Fan
CPU Fan
Vcore
+5(V)
+12(V)
+1.05(V)
+1.5(V)
5VSB (V)
VBAT (V)
Case Open Detection
CPUFAN Mode Setting
CPUFAN PWM Control
Advanced
:34 o C/93 o F
:90 o C/194 o F
:NA
:6490 RPM
:1.088 V
:5.040 V
:12.013 V
:1.032 V
:1.488 V
:4.864 V
:3.168 V
[Disabled]
[Manual Mode]
[250]
Current System Temp to VBAT (V)
These fields will show the temperature, fan speed and output voltage of the
monitored devices or components.
Case Open Detection
Set this field to Enabled to allow the system to alert you of a chassis intru-
sion event.
CPUFAN Mode Setting
Selects the CPU fan’s mode. The options are Manual Mode and Thermal
Cruise Mode.
CPUFAN PWM Control
This is the PWM’s duty cycle control. Enter the CPU fan’s speed in this field.
The higher the value, the faster the CPU fan’s speed.