DFI LR100-N16D - Manual (Page 75)

75
3
BIOS Setup
Change User Password
This field is used to set or change the user password.
To set a new password:
1. Select the Change User Password field then press .
2. Type your password in the dialog box then press . You are limited to
eight letters/numbers.
3. Press to confirm the new password.
4. When the Password Installed dialog box appears, select OK.
To change the password, repeat the same steps above.
After you have set the user password, the Clear User Password and Password
Check fields will appear.
Clear User Password
To clear the password, select Clear User Password then press . The Pass-
word Uninstalled dialog box will appear.
Password Check
Setup
The BIOS checks for the user password whenever accessing the Setup utility.
Always
The BIOS checks for the user password when accessing the Setup utility and
booting the system.
Install or Change the
password.
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
Enter Change
F1 General Help
F10 Save and Exit
ESC Exit
Security Settings
Supervisor Password : Not Installed
User Password : Not Installed
Change Supervisor Password
Change User Password
Boot Sector Virus Protection [Disabled]
Security
Enter New Password