DFI CM100-C - Manual (Page 32)

www.dfi .com
32
Chapter 3 BIOS Setup
Chapter 3
DDR3 Voltage Setting
This section is used to configure the DDR3 Voltage Setting.
DDR3 Voltage Setting.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
DDR3 Voltage Setting [1.5V]
Advanced
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save Changes and
Reset
ESC: Exit
DDR3 Voltage Setting
Selects the DDR3 Voltage Setting. The options are 1.5V, 1.35V and 1.25V.
IDE Configuration
This section is used to configure the IDE device.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
Advanced
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save Changes and
Reset
ESC: Exit
IDE Confi guration
SATA Port0 Not present
SATA Port1 Not present
SATA Port2 Not present
SATA Port3 Not present