DFI NP951-B16C - Manual (Page 73)

73
3
BIOS Setup
PC Health Status
Phoenix - AwardBIOS CMOS Setup Utility
PC Health Status
Item Help
Menu Level

↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Case Open Warning
Shutdown Temperature
Current System Temperature
Current CPU Temperature
CPU Fan Speed
Vcore
5V
1.05V
1.8V
+12V
VBAT (V)
Smart CPU FAN Temperature
CPU FAN Tolerance Value
Disabled
Disabled
40 o C/104 o F
39 o C/102 o F
0 RPM
0.90V
5.17V
1.05V
1.83V
12.14V
3.10V
60 o C/140 o F
5
Case Open Warning
Set this field to Enabled to allow the system to alert you of a chassis intrusion
event.
Shutdown Temperature
You can prevent the system from overheating by selecting a temperature at
which the system will shutdown. If the system detected that its temperature ex-
ceeded the one set in this field, it will automatically shutdown. This function will
work only if your operating system supports the ACPI feature.
Current System Temperature to VBAT (V)
These fields will show the temperature, fan speed and output voltage of the
monitored devices or components.
Smart CPU Fan Temperature
This field is used to select the temperature at which the CPU fan runs at full
speed. The temperature will vary within the range of the tolerance value selected
in the field below.
The settings on the screen are for reference only. Your version may not be identical to
this one.