DFI NP951-B16C - Manual (Page 10)

1
10
Introduction
Processor
Chipset
System Memory
Expansion Slots
Graphics
Audio
LAN
Serial ATA
Rear Panel I/O
Ports
Chapter 1 - Introduction
• Intel ® Atom TM N270 processor
• 1.6GHz core frequency, 1.10V voltage
• 2.5W thermal design power
• 512KB on-die second level cache
• 533MHz FSB
• 22x22 mm, 1.0 mm ball pitch and 437 balls FCBGA
• Intel
® chipset
- Intel ® 945GSE Graphic Memory Controller Hub(GMCH)
- Intel ® ICH7M I/O Controller Hub
• One 200-pin SODIMM socket (1.8V)
• Supports DDR 400/533MHz
• Supports up to 2GB system memory
• 1 mini PCI slot
• 1 CompactFlash socket
• Intel
® GMA 950
• 133/166MHz internal graphics core render frequency at
1.05V core voltage
• Supports 18-bit dual-channel LVDS
• VGA display resolution up to SXGA+ 1400x1050
• Realtek ALC262 High Definition Audio
• Two 24-bit stereo DACs and three 20-bit stereo ADCs
• S/PDIF audio interface
• One Realtek RTL8111C PCI Express Gigabit Ethernet con-
troller
• Supports 10Mbps, 100Mbps and 1Gbps data transmission
• IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps) com-
pliant
• One Serial ATA interface supported which is compliant with
SATA 1.0 specification (1.5Gbps interface)
• Two-mode operation supports legacy mode using I/O space
or an AHCI mode using memory space
• SATA and PATA can be used in a combined function mode
(When SATA is used with PATA, AHCI mode is not support-
ed.)
• 1 mini-DIN-6 port for PS/2 mouse and PS/2 keyboard ports
• 1 DC-in 12V jack or 4-pin ATX 12V power connector
(optional)
• 1 DB-9 RS232 serial port
- Pins 1 and 9 functions as RS232 signal or power (select-
able via jumper)
• 1 DB-15 VGA port
• 1 RJ45 LAN port
• 2 USB 2.0/1.1 ports
Specifications