DFI NP905-B16C - Manual (Page 9)

1
9
Introduction
Serial ATA
IDE
Temperature
Humidity
Power
Regulatory
PCB
• SATA interface suppor ts data transfer rate up to 1.5Gb/s
(150MB/s) per port
• Two SATA por ts with independent DMA operation supported
on ports 0 and 2
• Two-mode operation supports legacy mode using I/O space or
an AHCI mode using memory space
• SATA and PATA can be used in a combined function mode
(When SATA is used with PATA, AHCI mode is not supported.)
• Bus Master IDE (PATA) controller
• Supports up to two IDE devices
• Ultra ATA 100/66/33
• Operating: 0 o C to 60 o C
• Operating: 10% to 90%
• Input: 12V, 5VSB, VCC_RTC
• EMC: CE, FCC Part 15 Class B
• Dimensions
- Micro COM Express form factor
- 9.5cm (3.74") x 9.5cm (3.74")
• Compliance
- PICMG COM Express R1.0 basic form factor, Type 2