DFI DS912-OT Manual - Manual (Page 98)

98
8
Supported Software
F6 Floppy Configuration Utility
This is used to create a fl oppy driver diskette needed when you install Windows ®
XP using the F6 installation method. This will allow you to install the operating
system onto a hard drive when in AHCI mode.
1. Insert a blank fl oppy diskette.
2. Locate for the drivers in the CD then copy them to the fl oppy diskette. The
CD includes drivers for both 32-bit and 64-bit operating systems. The path to
the drivers are shown below.
32-bit
CD
Drive:\AHCI_RAID\F6FLOPPY\f6fl py32
64-bit
CD
Drive:\AHCI_RAID\F6FLOPPY\f6fl py64