DFI DS912-OT Manual - Manual (Page 51)

51
5
Ports and Connectors
SATA (Serial ATA) Connector
SATA 0
7
RXN
GND
TXP
TXN
GND
1
RXP
GND
The Serial ATA connector is used to connect a Serial ATA device. Connect one
end of the Serial ATA data cable to a SATA connector and the other end to your
Serial ATA device.
The system board package also comes with a power cable that must be con-
nected from the system board to the SATA drive’s power connector in order to
provide power to the drive.