DFI TPC121 Installation Guide - Manual (Page 18)

18
1. Grasping the Mini PCIe card by its edges, align the
card into the slot at an approximately 30 degrees angle.
Apply firm even pressure to each end of the card until it
slips down into the slot. The contact fingers on the edge
of the card will almost completely disappear inside the
slot.
2. Push the Mini PCIe card down until the clips at each
end of the latch lock into position. You will hear a
distinctive “click”, indicating the card is correctly locked
into position.
Clip
Clip
Installing the Mini PCIe Card