Leds, Front view – D-Link DCS-900W User Manual
Page 8
8
LEDS
LED
stands for
L
ight-
E
mitting
D
iode.
Power LED
The Power LED is positioned on the right side of the DCS-900W lens. Steady green
confirms that the DCS-900W is powered ON.
Note:
There are three settings for the Power LED for monitoring purposes: Normal / Off /
Dummy. Please refer to the DCS-900W Camera Configuration section on P. 24 for
detailed information and usage.
LAN LED
The LAN LED is positioned on the right side of the DCS-900W’s lens. It is located below
the Power LED.
Steady orange confirms a good connection to the LAN.
Depending on the data traffic, the LED will begin to flash to indicate that the DCS-900W
is receiving/transceiving from/to the LAN network.
Front view
Power LED
LAN LED