Devolo MicroLink 56k Fun II - Manual (Page 12)

Appendix
|
| devolo MicroLink 56k Fun II |
12
EN
3 Appendix
3.1 Technical data
This table has detailed information on the MicroLink 56k Fun II for those
interested.
CE conformity
This product meets the requirements of the 1999/5/EG Directive R&TTE and
is designed for connection to public telecommunications networks in the EU
and Switzerland.
MicroLink 56k Fun II
Power supply 230-V/9V
AC
plug
Power consumption
(about) Transmission phase (online)400 mA typ.
Command phase (offline)300 mA typ.
Dimensions 40 x 90 x 113 mm (height x width x depth), plastic housing
Environment 5..40°C, humidity 0..80%, non condensing
Transmission rates and
protocols Receive: 56.000–300 bps, asynchronous;
Send: 33.600–300 bps, asynchronous
(V.92, V.90, V.34, V.32bis, V.32, V.22bis, V.22, V.21, V.23)
Error correction V.42
Data compression V.42bis
With V.92: V.42bis and V.44
Command set AT command set according to V.250/V.25ter
Voice mode Voice command set V.253
Fax mode 14.400–2400 bps according to V.17, V.29 and V.27ter;
Fax command set class 1 (TIA/EIA-578) and class 1.0 (T.31)
Dialing method Multifrequency dial
Outside line Via flash key or digit
Bit-rat adaption Automatic according to V.8
Computer interface V.24/RS-232 (max. 230.400 bps including automatic detection)
CE conformity Tested under EN 50022, Class B; EN 55024, EN 60950;
technical requirements in accordance with R&TTE for all Euro-
pean countries and Switzerland