Devolo MicroLink 56k Fun II - Manual (Page 11)

|
Installation 11
| devolo MicroLink 56k Fun II |
EN
2.5 Country selection
2.5.1 Automatic country selection during installation
The MicroLink 56k Fun II operates differently in different countries. Therefore,
the country in which you wish to operate the modem must be selected.
ቢ Please reinsert the devolo product CD in your CD-ROM drive. The country
selection program will be started automatically when the CD is inserted.
Use this program to select the country in which you would like to use the
MicroLink 56k Fun II.
ባ Select the entry United Kingdom, for example, to configure the modem
for use in the United Kingdom, and confirm with OK.
ቤ Once the modem has been successfully configured, the CD setup is initi-
ated and you can begin installing the software provided.
2.5.2 How to change the country selection
It is important to select the correct country. Only select the country in which
you wish to connect the modem to the telephone system. The telephone sys-
tems in different countries often require very different settings on the
modem. If you select the wrong country, incorrect and possibly even damag-
ing settings for operation will be made. This may result in the modem not
operating correctly. In the worst case damage to the telephone system or
your modem may result.
To change the country selection for your modem at a later time, start the
devolo Configuration Manager under Start
Ī Programs Ī devolo Ī Country
selection.