Devolo dLAN 200 AV - Manual (Page 21)

|
Appendix 21
| devolo dLAN 200 AV |
5.2 Important safety instructions
All safety and operating instructions should be read and understood before
using the device, and should be kept for future reference.
b Never open the dLAN 200 AV. There are no user-serviceable parts inside the
dLAN 200 AV.
Do not try to service this product yourself! Contact qualified technicians each
and every time your device needs maintenance. There is a risk of electric shock!
b
Use the dLAN 200 AV in a dry location only.
b Do not insert any objects into the openings of the dLAN 200 AV.
b
To disconnect the dLAN 200 AV from the power supply grid, pull the power
plug.
b Do not keep the dLAN 200 AV in direct sunlight.
b
Slots and openings on the case serve as ventilation. Never block or cover
them.
b
Never set up the dLAN 200 AV near a heater or radiator.
b
The dLAN 200 AV should be located only where sufficient ventilation
according to the instructions of the manufacturer can be ensured.
b
Disconnect the dLAN 200 AV from the power supply grid before cleaning.
Use a moist towel to clean the device. Never use water, paint thinner, ben-
zene, alcohol or other strong cleaning agents when cleaning the device, as
these could damage the case.
b
Never use the dLAN 200 AV with a power supply that does not meet the
specifications provided on the rating plate. If you do not know what type of
power supply you have at home, contact your dealer or energy supplier.
b
In the event of damage, disconnect the dLAN 200 AV from the power supply
grid and contact customer service. This applies, for example, if
ć the power cable or plug is damaged.
ć
liquid has been spilled on the dLAN 200 AV or objects have fallen into
the device.
ć
the dLAN 200 AV has been exposed to rain or water.
ć
the dLAN 200 AV does not work, even though the operating instructions
have been followed properly.
ć
the dLAN 200 AV’s case is damaged.