Devolo dLAN 200 AV - Manual (Page 12)

devolo dLAN 200 AV software
|
| devolo dLAN 200 AV |
12
nected to the Ethernet port, a dLAN adapter will go into standby mode after
about 20 minutes. It cannot be configured while in standby mode. As soon as
network device (e.g. computer) connected to the Ethernet interface is switched
on again, your dLAN 200 AVdesk can also be reached again via the electric sup-
ply.
ቤ In the following dialog box select a common password for your dLAN net-
work and confirm your input with Next.
The password set up initially by devolo is HomePlugAV (case sensitive).
ብ The dLAN 200 AV connected directly to your computer is detected automat-
ically. All other dLAN adapters have to be entered manually. Enter in
sequence the security IDs of the dLAN 200 AV that are to be included into
a network and click Add. Click Next when you have entered all desired
dLAN 200 AV.
ቦ Exit securing your network by clicking Finish. Your dLAN network is now
secure against unauthorized access from outside.
The configuration of the dLAN 200 AV network can be changed or updated at
any time. To do this repeat the configuration process as described above.