Delta 36-255 - Manual (Page 18)

KEEP TOOL CLEAN
Periodically blow out all air passages with dry compressed air. Clean all plastic parts with a soft damp cloth.
NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material.
CAUTION: WEAR SAFETY GLASSES WHILE USING COMPRESSED AIR.
FAILURE TO START
Should your tool fail to start, check to make sure the prongs on the cord plug are making good contact with the
outlet. Also, check for blown fuses or open circuit breakers in the line.
ACCESSORIES
A complete line of accessories is available from your Delta Supplier, Porter-Cable
• Delta Factory Service
Centers, and Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com
for a catalog or for the name of your nearest supplier.
WARNING: Since accessories, other than those offered by Delta, have not been tested with this product,
use of such accessories could be hazardous. For safest operation, use only Delta recommended accessories
with this product.
18
35-646 62 TOOTH BLADE
35-651 96 TOOTH BLADE
1347295 WORK CLAMP