Delta Dore TYWATT TRI - Manual (Page 4)

- 7 -
Meter indicator light
On
Flashing
Off There is no power supply
Check your circuit breaker There is no power supply
Check your circuit breaker
Normal operation
Normal operation
LED status
With electromechanical
meter
With electronic
meter
Faulty connection with meter
- check the connection with the
electronic meter
- obtain confirmation from your electricity
supplier that the remote information
connection has been released
How to read your consumption indicators ?
Select the type of consumption you wish to consult by
pressing button C1/C2:
C1: Cumulated total since first startup (non erasable)
C2: Total since last reset
View the consumption of all subscribed price option
periods by pressing SELEC.
Displays the maximum mean power reached, at end of
reading (before returning to the current display).
Resetting the Total Consumption Indicators to Zero (C2 only)
Press button RESET C2 for approximately 10 seconds to reset all total consumption indicators to
zero, as well as maximum mean power, since the last reset.
Maximum Mean Power Reached
Every 6 minutes, the TYWATT TRI measures the maximum mean power reached. If the measured
value does not exceed the maximum value displayed during a 6-minute acquisition period, the
TYWATT TRI will continue to display the previous value.
Example:
3
2
1
PRINCIPLE
- 6 -
5 6
Instantaneous
power (in W)
Mean
power
E.g. 5,300 Watts
Instantaneous
power (in W)
Mean
power
E.g. 6,230 Watts
approximately 6 minutes
t
approximately 6 minutes
t
Guarantee conditions
This energy manager is guaranteed for 2 years from its delivery date.
This guarantee is applied under the conditions of article 1641 and the following articles of the civil code (France only).
To benefit from the guarantee, you must enclose proof of purchase, bearing the date of acquisition, when you return your
faulty energy manager.
It covers the replacement of faulty parts, labor and return carriage to the customer.
Excluded from the guarantee:
- Pieces of equipment whose serial number has been damaged, modified or deleted
- Units that were not connected or used in accordance with the instructions given on the unit or in the guide.
- Units modified without prior permission from the manufacturer.
- Units damaged as a result of impacts.