Datatek Upgrade/Backup/Reload - Manual (Page 14)

U t i l i t i e s
03/08/07 14
4.2 B ACKUP
Syntax:
backup [-v] [-d] [-p] -m [-t] [-b] [-x]
Where:
-v Print version of the utility.
-d Present versbose debugging data.
-p Use password in lieu of the default for the purposes of logging into the
device console.
-m The target device type. ( e.g. –m4180 )
-t Over-Ride the default TCP number. Since this option is an over-ride. It should
follow the device definition –m as that option sets the default and
options are processed left to right.
-b In situations where a UMI is used in a BNS/Datakit network as a means to
access a serial port connected device, this options specifies the “double-dial”
dial string used in the BNS/Datakit network.
-x Exclude advanced TCP features. Used for Solaris 2.6 and earlier.
The IP address of the target device. In situations where a UMI is used to access
a serial port, the IP address of the UMI. In situations where a serial port is
connected to another device. This is IP address of the device which has the
support serial port.
The name of the file to be created containing the Database Backup.
4.3 R
ELOAD
Syntax:
reload [-v] [-d] [-r] [-p] -m [-t] [-b] [-slow] [-x]
Where:
-v Print version of the utility.
-d Present versbose debugging data.
-p Use password in lieu of the default for the purposes of logging into the
device console.
-r Automatic Reboot after Upgrade.
-m The target device type. ( e.g. –m4180 )
-t Over-Ride the default TCP number. Since this option is an over-ride. It should
follow the device definition –m as that option sets the default and