Datatek Enhanced Security Guide - Manual (Page 6)

I P-CommKit En hanced Securit y G uide
11/29/05 Datatek Applications Inc. 6
3 C O N F I G U R A T I O N
It's easy to configure IP-CommKit to use the Enhanced Security Feature. If you are
installing the IP-CommKit software, follow the procedures in the IP-CommKit Installation
and Administration Guide. When you have completed these procedures, enter the
following command on the UTM console port.
trk encrypt=on
If your host uses several UTM modules, you should enter this command on the console
port of each. The host will automatically detect that a UTM is using encryption, and will
start using it as well. There are no configuration changes required on the host computer.