Daktronics DMP-1500/M3 (SS & ST) Setup With Show Control - Manual (Page 6)

DMP-1500/M3 (SS & ST) Setup With Show Control Quick Guide 6 of 11
201 Daktronics Drive PO Box 5128, Brookings, SD 57006
Tel: 1-800-325-8766 or 605-697-4300 Fax: 605-697-4746
Website: www.daktronics.com
DD1805670 Rev 11
2 July 2012
5. For more settings, click the Options tab on the
right side of the window. Here you can adjust the
Import mode, Color correction, Contrast, and
Brightness. To restore the image to its original
settings, click Defaults.
6. Click Import when finished.
7. If you want the image or video to be used for the
background and it imports in front of the content:
a.
Right-click on the image.
b. Go to Order > Send to Back.
Adding Real-Time Data (RTD)
1. Click the Dynamic Data Library tab.
2. In the Profile drop-down list, select
the desired sports profile.
3. After selecting the Profile, folders of
data fields related to that profile
appear. Click the buttons to view
all of the the fields contained within
each folder.
4. Click and drag the desired data field
into the presentation.
5. The data field may be formatted in
the same manner as a text box
(refer to Adding Text) with one
exception: at the bottom of the
fonts list, there is a section called
Venus Fonts. These are the only
fonts that can be used for RTD fields.
Saving the Presentation
1. Click the Save button .
2. In the Save As window, navigate to the folder in which you want to
save the presentation. You can click the Create New Folder
button if needed.
3. Enter a descriptive File name for the presentation and click Save.
Note: Files with RTD cannot be saved to a display’s root directory.
Files must be saved inside a folder, either “Default” or a folder of
your own creation. Also, it is not possible to create new folders
within the “Default” folder.
Importing SS Media Kit Content
1. Insert the SS SCS Content Kit flash drive (Daktronics part number
0A-1539-2106) into an available USB port.
2. Press the Windows key [] + [E]. Double-click the flash drive, and
then double-click the Importing SS Media Kit Content PDF and
follow the instructions.
Playing Content
After creating content in Content Studio, you must return to Display
Studio to set up buttons to play your content.
Creating a New Workspace
1. Click the Display Studio Hub button in the upper-left corner of the
application screen, and then go to New > Workspace.
2.
Type in a descriptive Name for the workspace, and then click Save.