Daktronics All Sport 100 Contro - Manual (Page 26)

Copy Range
LCD Display Action
COPY: nn:nn*
SEG xx to yy
nn:nn = segment value to be
copied
xx = starting segment value
yy = ending segment value
Press <COPY RANGE x> to set a range of segments to a specific
value.
All segments from xx to yy (inclusive) will be set to the value specified
by nn:nn.
Enter the value specified by the asterisk and press <ENTER*> to
move to the next field.
Auto Stop
LCD Display Action
STOP AT EACH SEG
1*YES 2-NO
*= current setting
STOP AT LAST SEG
1*YES 2–NO
* = current setting
This setting determines the operation of the console when each
segment is completed.
Press <1> to set the console to stop after each segment is
completed. Wait for the <START> key to proceed with the next
segment.
Press <2> to set the console to automatically begin the next
segment when each segment is completed.
If the setting of Auto Stop At Each Seg is NO, the console will
prompt for the Auto Stop At Last Seg setting.
Press <1>or YES to set the console to stop when the last
segment has been completed.
Press <2> or NO to set the console to start over at the first
segment when the last segment is completed
Warning Time
LCD Display Action
Warning time
0:00
0:00 = default
Press <WARNING TIME x>, enter the time in minutes and seconds and
press <ENTER*>.
Enter 00:00 for no warning time.
When the warning time is reached, the segment number flashes until
the main clock reaches zero.
22 Baseball Operation