Daktronics DF-1020 - Manual (Page 53)

Gas Price 6-5
Display Operation
The following LCD prompt is shown for either Manual or Automatic dimming
selections:
LCD Screen Action
INTENSITY XX
↓↑
ENTER TO SET
XX – Current intensity (1-16)
Max intensity - 16
Press the up or down arrow key <
↑↓> to
modify the current intensity of the display
(Note: The DataMaster must be connected to
the display.)
Press < ENTER > to accept this intensity. If the
manual dimming mode is selected, this will be
the new intensity for the display. If the
automatic dimming mode is selected, the
display will illuminate in full-bright mode,
which is the maximum intensity level.
LCD Screen Action
DIMMING
BLANK SIGN
↓
BLANK THE SIGN?
YES
NO
Press < ENTER > to accept this option.
The next LCD dialog will ask whether you
want to blank the screen or escape. The LCD
toggles between Yes and No. Pressing
<CLR> resumes normal operation; pressing
<ENT> actually blanks the sign.
LCD Screen Action
RESTART SIGN?
YES
NO To resume normal operation from a blanked
sign, press the <DIMMING> key again. The
DM-100 will display a Restart Sign message.
Press <ENT> to restart or press <CLR> to
return to the menu without restarting the sign.
Display Sequence
Once connected to the base of the display or to the indoor j-box, press < DISPLAY
SEQUENCE > to display the new sequence on the display. This button will also allow
for a preview of the new sequence on the LCD.