Dual DP295 - Manual (Page 14)

14
Moving to another chapter / title
Some discs may contain more than one title or chap-
ter. If the disc has a title or chapter menu recorded on
it, you can start playback from the selected item.
1 Select (chapter) or (title) from the menu
bar.
2 Use number keypad (0~9) to select a desired title /
chapter number and press OK to start playback.
Note
- If the playing disc is VCD, SVCD, MP3 or CD, this
menu item is useless.
- If in the program playing mode this item is useless.
Playback from a selected point
This function allows you to start playing at any chosen
time on the disc.
1 Select from the menu bar.
2 Enter hours, minutes and seconds from left to right
in the time edit box using the number keypad (0~9).
Each time an item has been entered, the next item
will be highlighted.
3 Press /ll to start playback.
Note
This function is not available for MP3.
Operations Operations Operations Operations Operations
Repeat play
You can only select the repeat play mode during play-
back.
For DVD repeat chapter / title / disc
- Select from the menu bar and press key
to select the following repeat type cyclically:
CHAPTER REPEAT ON --> TITLE REPEAT ON -->
REPEAT OFF.
For VCD/SVCD/CD /MP3 repeat track / disc
- Press key to select the following repeat type
cyclically:
REPEAT ONE --> REPEAT ALL --> REPEAT OFF
Note
- For VCD, repeat play is not possible during PBC
playback.
- When operating this function, the OSD and VFD
will display the operating information.
Repeat A - B
You can play a specific section in a chapter / track
repeatedly.
1 Select from the menu bar and press key at
the starting you want .
2 Press key again at the end portion you want.
The specific section will now repeat continuously.
3 press key the third time to cancel this function.
Note:
The A-B can be set only within the same chapter /
track.
REPEAT
A-B
--:--:--