DAHON Service Manual - Manual (Page 9)

Flat Pak Stem Continued
High
City position
Level
Trekking position
Low
Road position
Step 3 - Lift front lock lever and rotate handlebars
to desired position. While establishing your
perferred riding position, check to see that the
handlebar is readjusted in the right position.
The correct angle of the handlebars should
allow the fingers to reach the brake levers.
Step 4 - After the handlebar has been
placed in the desired position, close front
lock lever tightly.
NOTE: Check that the angle of the
handlebar will allow immediate
access to the brake levers.
NOTE: To avoid rust, regularly apply
grease to the joints.
Flat For folding
To achieve your preferred riding position,
you can adjust the height and position of
the Flat Pak stem. Here are some
suggested riding positions:
WARNING:
Before you start riding your bicycle, check
to see that all screws and lock levers are
tightly secured.
09