DAHON Service Manual - Manual (Page 27)

For the best possible outcome, tighten the cable adjustment bolt (clockwise) until you
hear a noise that occurs without harming the shifter being operated. Proceed to loosen
(counter-clockwise) 360 degrees. Lastly, shift through all gears to check that no sound
occurs in any of the gear positions.
Index Shifting Adjustment
Best Setting
While turning the crank arm, use the shifter to move the derailleur to the largest sprocket.
Operate the shifter once more to move the derailleur to the 2nd-gear sprocket. Operate
the shifter to the point of movement, and then turn the crank arm.
3 If shifting to 2nd is not
possible, or noises occur
when the chain contacts
the largest sprocket.
Simply move to 2nd
gear and turn the screw
counter-clockwise until
the noise is no longer
heard.
Making a change from
a 3rd gear sprocket.
When tightening, turn
the cable adjustment
bolt clockwise until the
chain returns to the
2nd sprocket.
2
2 2
27