D.T. Systems Micro-iDT PLUS - Manual (Page 7)

PARTS & FUNCTIONS
Intensity Selection Dial
The intensity selection dial can be
set from level 1 to level 16 to find
the exact stimulation level for your
dog (see page 16).
Transmitter Antenna
Be sure to check that the antenna is securely fas-
tened to the transmitter before each use. Hand-
tightened only. Be careful when screwing the an-
tenna into the transmitter. Over-tightening the an-
tenna can cause damage to the antenna or the
antenna mount.
Magnet Indicator (Red Mark)
The RED mark indicates the location of
the magnet in the transmitter. The indi-
cator is used to turn the receiver ON/
OFF and for ID programming.
Transmitter Indicator Light
When one of the buttons on the transmitter is
pushed, the Red LED light will turn on to indicate
that the transmitter is being operated. If the Red
LED light blinks rapidly after pressing any of the
transmitter buttons, the 9-volt battery will need to
be replaced soon.