D.T. Systems Micro-iDT PLUS User Manual
Page 10
10
Contacts
Contacts should fit snugly against the dog’s neck
to ensure good contact with the skin. For more
information on the proper fit of the collar, see
page 15.
PARTS & FUNCTIONS
Battery Charging Receptacles
The battery charging receptacles are located on
the side of the Collar Receiver. After charging,
always close the jack with the rubber plug to
prevent foreign particles from getting inside the
unit.
NOTE
The unit is still waterproof even if water gets into the charg-
ing receptacle. However, if water should get in, we recom-
mend rinsing out the charging receptacle and allowing it to
dry, especially after use in salt water. This will prevent pre-
mature corrosion in the metal pins inside that make contact
with the charger plug.