Cybex 12231 VR3 Dip Chin - Manual (Page 8)

Cybex Owner’s Manual
8
Assembly
Machine Specifications
Total Weight and Size VR3 Dip/Chin Assist 12231 Standard Stack
Weight Machine Dimensions at Rest Machine Dimensions in Use
720 Lbs 62” L x 55” W x 98” H Same
327 Kg 157 cm L x 139 cm W x 248 cm H Same
Maximum User Weight Maximum Training Weight
300 lbs/135 kg 305 lbs/138 kg
Choosing and Preparing a Site
Before assembling the unit, verify the chosen site meets the following criteria:
• Area is well lit and well ventilated.
• Surface is structurally sound and properly leveled.
• Free area for access to unit and emergency dismount. Minimum clearance is 23.6 inches
(0.6 meters).
• Adjacent units may share the free area.
It is the responsibility of the facility owner/owner of the equipment to ensure that there is appropriate
clearance around each machine to allow for safe use and passage.
In compliance with the ADA (American Disabilities Act) there must be clear floor space of at least
30 by 48 inches and be served by an accessible route for at least one of each type of exercise
equipment. If the clear space is enclosed on three sides (e.g., by walls or the equipment itself), the
clear space must be 36 by 48 inches.
All other machines must have a clear floor space of 23” for all access point on the machine, unless
shown in the Owner’s Manual.