Cybex 11030 Eagle Row User Manual
Page 10
10
Cybex Owner’s Manual
7. Remove pulley from pulley bracket.
8. Using a Phillips screwdriver, remove the two screws securing the cam cover plate (guard)
and remove the plate.
Cam Cover Plate
Screw
9. At the opposite end of the pivot shaft, locate the small plate.
Small Plate
BHSCS (2)
10. Using a 7/32” Allen wrench, remove the two BHSCS securing the small plate and remove the
plate.
11. Remove one of the two BHSCS securing the pivot shaft.
BHSCS
Pivot Shaft
Washer
Pulley Shaft
Pulley/Cable
12. Remove the pivot shaft.
CAUTION: Be extremely careful when removing shaft so you do not ruin the threads on
the shaft.
13. Rotate cam so that the flat part is facing down.
14. Slide pulley shaft out of machine.
This manual is related to the following products:
- 11010 Eagle Overhead Press 11190 Eagle Torso 11000 Eagle Chest Press 11150 Eagle Incline Press 11070 Eagle Arm Curl 11140 Eagle Prone Leg Curl 11100 Eagle Back Extension 11080 Eagle Arm Extension 11050 Eagle Leg Extension 11060 Eagle Seated Leg Curl 11181 Eagle Hip Ab-Ad 11120 Eagle Calf 11090 Eagle Abdominal 11160 Eagle Lat Raise 11130 Eagle Lat Pull 11111 Eagle Fly-Rear Delt 11170 Eagle Glute