Cybex 11020 Eagle Incline Pull - Manual (Page 16)

16
Cybex Owner’s Manual
2. Align holes in decal with appropriate holes in weight stack. Do not allow the adhesive to
touch weight stack at this time.
3. Insert a guide pin through each hole of the template. A guide pin can be anything that fits
through the weight stack hole, such as a weight stack selector pin.
4. Align decal and rub it onto weight plates.
5. Remove front side, leaving decals adhering to weight plates.
180
81.0
144.0
135.0
126.0
117.0
108.0
200
99.0
90.0
300
280
260
240
220
320
340
153.0
180.0
360
171.0
162.0
400
380
20
9.0
72.0
63.0
54.0
45.0
36.0
40
18.0
140
120
100
80
60
160
180
81.0
144.0
135.0
126.0
117.0
108.0
200 99.0
90.0
300
280
260
240
220
320
340
153.0
180.0
360
171.0
162.0
400
380
20
9.0
72.0
63.0
54.0
45.0
36.0
40
27.0
18.0
140
120
100
80
60
160
1
2
10
11
8
9
7
5
4
12
14
13
15
16
17
18
19
20
3
6
Pounds
Weight Stack
Guide Rod
Kilograms
IMPORTANT:
It is important that you perform regular inspection and maintenance activities on your equipment.
See the CYBEX Eagle Owner’s Manual for inspection and maintenance activities. If you do not have
a CYBEX Eagle Owner’s Manual or if you have any questions or concerns, call CYBEX Customer
Relations at 888-462-9239.
Securely anchor machine to the floor
Cybex strongly recommends to maximize stability, equipment must be secured to a solid level
surface.
CAUTION: Cybex is not responsible for the actual anchoring of equipment. Consult with
a professional contractor.
WARNING: Use fasteners having a minimum of 500 lbs. tensile capacity (3/8’’ grade 2
bolts or better).
WARNING: If legs/frame does not contact surface, DO NOT pull down with anchors. Shim
any leg or frame not in contact with surface using flat washers.
Verify proper operation