Tools required, Assembly procedure, 9/16” wrench – Cybex 18030 Bravo Lift User Manual
Page 9: 7/32” allen wrench, 1/8”allen wrench, 3/4” socket or wrench, Hammer, 3/16” pin punch, Loctite, Cybex owner’s manual
9
Cybex Owner’s Manual
The dimensions stated in the assembly instructions of this manual include the maximum foot print (in
use) dimensions.
•
Area is not in the vicinity of high humidity, such as in the vicinity of a steam room, sauna, indoor
pool or outdoors. This unit is designed to function normally in an environment with a relative
humidity range of 30% to 75%.
Exposure to extensive water vapor, chlorine and/or bromine could adversely affect the electronics as
well as other parts of the unit.
•
Area maintains an ambient temperature range of 50° F (10° C) to 104° F (40° C) degrees.
Tools Required
•
9/16” Wrench
•
7/32” Allen wrench
•
1/8”Allen wrench
•
3/4” Socket or wrench
•
Hammer
•
3/16” Pin punch
•
Loctite
®
#242
Assembly Procedure
Two people will be required for this procedure.
Read and understand all instructions thoroughly before assembling this unit. Check all items
carefully. If there is damage, see the Customer Service section of this manual for proper procedure to
return, replace, or reorder parts.
Verify parts list shown below.
Qty
Part Number
Description
Diagram
2
16010-311
Foot pad
4
13000-353
Foot pad
13000-354
13000-353
13000-354
13000-354
13000-355
13000-354
13000-355
16010-311
16010-311
12090-322
17000-320
12000-345
PR07004
11090-392
1
DE000010
Decal (10-200)
DE000010
DECAL, WT PLATE (10 - 200) 2:1
6-6-13
REL
_
125
1:1
OWATONNA
MFG. APPR.
TECH. PUBS. APPR.
DATE
DATE
REV.
DWG. NO.
SCALE
SIZE
CHECKED BY
DWG. BY
TITLE:
FINISH:
MATERIAL:
C
SHEET
OF
2 2
EXCEPT AS NOTED
GENERAL
TOLERANCES:
2 DECIMALS ± .03
3 DECIMALS ± .015
ANGLES ± 1°
FEATURES SHOWN
PERPENDICULAR OR
PARALLEL SHALL BE
SO WITHIN ± 1°
REMOVE ALL BURRS
BREAK SHARP EDGES
.005/.010 R
SURFACE FINISH
INDICATED PER
ANSI B46.1-1985
GENERAL
MACHINING
DIMENSIONS
IN INCHES
DATE
DATE
REMOVE CARBURIZATION
AND SCALE FROM LASER
AND PLASMA CUT EDGES
ALL MATERIAL MUST COMPLY TO
EUROPEAN UNION DIRECTIVE
2002/95/EC RoHS (RESTRICTION
OF HAZARDOUS SUBSTANCES)
NOTES:
1. FONT - 40 POINT ARIAL BOLD.
HORIZONTAL SCALE 80%.
TRACKING -50.
90
40.8
72.6
68.0
63.5
59.0
54.4
100
49.9
45.4
150
140
130
120
11
0
160
170
77.1
90.7
180
86.2
81.6
200
190
10
4.5
36.3
31.8
27.2
22.7
18.1
20
13.6
9.1
70
60
50
40
30
80