Cybex 18030 Bravo Lift - Manual (Page 10)

10
Cybex Owner’s Manual
If Then
18030 can fit through
doorway
Two people will be required for this procedure
1. Move to desired location.
2. Remove the four shipping cones using a 3/4” socket or wrench.
3. Attach foot pads to each foot of frame.
If Then
18030 cannot fit
through doorway
Two people will be required for this procedure
1. Remove the four shipping cones using a 3/4” socket or wrench.
2. Attach foot pads to each foot of frame.
3. Remove front panel from machine.
Remove weight stack
1. Verify weight stack pin is disengaged.
2. Remove spiral pin connecting pulley using a hammer and a 3/16”
pin punch.
Spiral
pin