Yearly procedures – Cybex 18010 Bravo Press User Manual
Page 22
22
Cybex Owner’s Manual
CAUTION: Worn handles
•
Do not use handles if less then 1/8” of material remains on edge.
•
Replace all worn handles immediately.
Inspect bars and handles for wear, paying particular attention to tab area connection points.
Attachment
Hole
Replace bar if less
than 1/8” of material
remains to the edge.
Inspection
Action
Inspect bars and handles for wear, paying
particular attention to tab area connection points. Replace all worn handles immediately.
Inspect snap links for proper latching (indicates
wear).
Replace all loose or worn grips immediately.
Inspect all labeling for readability, including
instructional placards, warning and caution
decals.
Replace all worn labeling immediately.
Inspect all weight stacks for proper alignment
and operation.
Correct all improper alignment and operation
issues immediately.
Inspect guide rods for lubrication.
Wipe Weight Stack Guide Rods clean over entire
length. Lubricate with a light coat of medium
weight automotive engine oil.
Yearly Procedures
Replace all cables and belts annually
- 19001 Big Iron Half Rack 19011 Big Iron Half Rack 19021 Big Iron Multi Rack 19031 Big Iron Multi Rack 16240 Free Weight Power Cage 16185 Free Weight Dip Chin Leg Raise 16010 Free Weight Olympic Bench 16600 Free Weight Circuit Step 16200 Plate Loaded Hack Squat 16121 Plate Loaded Smith Press 16101 Plate Loaded Overhead Press 16105 Plate Loaded Overhead Press 18000-FT-325 Bravo 18022 Bravo 18020 Bravo Pull 18021 Bravo Pull 16080 Plate Loaded Chest Press 16190 Plate Loaded Incline Press 19041 Big Iron Power Rack 19051 Big Iron Power Rack 16230 Free Weight Squat Rack 16180 Free Weight Leg Raise Chair