Cybex 18010 Bravo Press User Manual
Page 11
11
Cybex Owner’s Manual
If
Then
4. Verify weight stack pin is disengaged.
5. Remove spiral pin connecting pulley using a hammer and a 3/16” pin
punch.
Spiral
pin
6. Move pulley and cable connection out of the way
7. Remove guide rod caps. Guide rod cap contains a compression
spring that will fly if grasp is not released slowly. Slide spring loaded
guide rod cap down guide rod until cap is clear of frame. Slowly
release grasp of guide rod cap and remove.
8. Remove lifting post.
9. Remove weight plates.
10. Remove plastic insert plug, located at top of machine.
Plastic Insert
plug
11. Loosen the two button head socket cap screws (BHSCS) securing
handle bar to frame using a 7/32” Allen wrench.
BHSCS
Handle Bar
This manual is related to the following products:
- 19001 Big Iron Half Rack 19011 Big Iron Half Rack 19021 Big Iron Multi Rack 19031 Big Iron Multi Rack 16240 Free Weight Power Cage 16185 Free Weight Dip Chin Leg Raise 16010 Free Weight Olympic Bench 16600 Free Weight Circuit Step 16200 Plate Loaded Hack Squat 16121 Plate Loaded Smith Press 16101 Plate Loaded Overhead Press 16105 Plate Loaded Overhead Press 18000-FT-325 Bravo 18022 Bravo 18020 Bravo Pull 18021 Bravo Pull 16080 Plate Loaded Chest Press 16190 Plate Loaded Incline Press 19041 Big Iron Power Rack 19051 Big Iron Power Rack 16230 Free Weight Squat Rack 16180 Free Weight Leg Raise Chair