Cybex 18010 Bravo Press User Manual
Page 13
13
Cybex Owner’s Manual
Securely anchor machine to the floor
Cybex strongly recommends to maximize stability, equipment must be secured to a solid level
surface.
WARNING: Anchoring equipment:
•
Cybex is not responsible for the actual anchoring of equipment. Consult with a
professional contractor.
•
Use fasteners having a minimum of 500 lbs. tensile capacity (3/8’’ grade 2 bolts or
better).
•
If legs/frame does not contact surface, DO NOT pull down with anchors. Shim
any leg or frame not in contact with surface using flat washers.
Install individual weight plates one at at time
1. Position each weight plate so wide edges of bushings face upward and narrow edges
of bushings face downward.
CORRECT
Wide bushing
edge faces upward
The narrow bushing edge
must face downward.
WRONG
2. Install lifting post.
3. Snap guide rods in to position.
- 19001 Big Iron Half Rack 19011 Big Iron Half Rack 19021 Big Iron Multi Rack 19031 Big Iron Multi Rack 16240 Free Weight Power Cage 16185 Free Weight Dip Chin Leg Raise 16010 Free Weight Olympic Bench 16600 Free Weight Circuit Step 16200 Plate Loaded Hack Squat 16121 Plate Loaded Smith Press 16101 Plate Loaded Overhead Press 16105 Plate Loaded Overhead Press 18000-FT-325 Bravo 18022 Bravo 18020 Bravo Pull 18021 Bravo Pull 16080 Plate Loaded Chest Press 16190 Plate Loaded Incline Press 19041 Big Iron Power Rack 19051 Big Iron Power Rack 16230 Free Weight Squat Rack 16180 Free Weight Leg Raise Chair