COWON SP2 - Manual (Page 12)

COWON SP2 29
+ Playing Music
Using This Product
+ USB Function
SP2 supports USB data transmission function. You can use SP2 as a PC
speaker via USB cable.
1. Turn on SP2 and connect it to a PC using a USB cable.
2. 'Installation Device Driver Software' window pops up on the PC screen.
3. Installation starts automatically. Sounds from the PC confirm the installation
process is complete.
4. SP2 buttons also control the music that is being played by PC.
- USB mode supports all of the functions of Windows XP, Windows 7 and
Windows 8.
- When sounds are not heard normally, check that Audio Output Device is
turned on at Settings - Hardware and Sound.
+ LED Status Indicator
LED indicator Status of SP2
Red LED on Charging
Red LED off Finish charging
■ Charging
■ Pairing with Bluetooth device
LED indicator Status of SP2
Red and blue LEDs flash
alternately
Pairing mode
Blue LED flashes once every
2 seconds
Not connect with device
Blue LED flashes twice every
4 seconds
Connect with device
Blue LED flashes continuously Calling/incoming call
Blue LED flashes once every
1 seconds
During a call
Red LED flashes instead of
blue LED
Low battery