En55022 - 1997 compliance, Safety compliance, En60950 – Comtech EF Data ICS-75 User Manual
Page 9: Low voltage directive (lvd)
ICS-75 Integrated Combiner Shelf
Revision 5
Preface
MN/ICS75.IOM
vii
European Electromagnetic Compatibility (EMC) Directive
EN55022 - 1997 Compliance
This equipment meets the radio disturbance characteristic specifications for information
technology equipment as defined in EN55022.
Safety Compliance
EN60950
Applicable testing is routinely performed as a condition of manufacturing on all units to
ensure compliance with safety requirements of EN60950.This equipment meets the
Safety of Information Technology Equipment specification as defined in EN60950.
Low Voltage Directive (LVD)
The following information is applicable for the European Low Voltage Directive
(EN60950):
Type of power cord required for use in the European Community.
!
CAUTION: Double-pole/Neutral Fusing
ACHTUNG: Zweipolige bzw. Neutralleiter-Sicherung
International Symbols:
Symbol
Definition
Symbol
Definition
~
Alternating Current
Protective Earth /
Safety Ground
Fuse
Chassis Ground
NOTE
For additional symbols, refer to the Cautions and Warnings section
featured earlier in this Preface.
NOTE
In order to meet the European Electromagnetic Compatibility (EMC)
Directive (EN55022, EN50082-1), properly shielded cables for DATA I/O
shall be used. More specifically, these cables shall be double-shielded
from end to end, ensuring a continuous shield.