Comtech EF Data ICS-75 - Manual (Page 17)

2–1
Chapter 2. INSTALLATION
2.1 Unpacking
The ICS-75 Integrated Combiner Shelf and its Installation and Operation Manual are
shipped in a preformed reusable foam enclosure inside a cardboard carton. Unpack and
inspect the ICS-75 as follows:
Step Procedure
1 Inspect shipping containers for damage.
2
If shipping containers are damaged, keep them until the contents of the
shipment have been carefully inspected and checked for normal
operation.
3 Remove the packing list from the outside of the shipping carton.
4
Open the carton by cutting the tape at the top of the carton (indicated
by
OPEN THIS END
) and remove the contents.
5
Check the contents against the packing list to verify completeness of
the shipment.
6
If damage is evident, contact the carrier and Comtech EF Data
immediately and submit a damage report.
7
If the unit needs to be returned to Comtech EF Data, use the original
shipping container.
CAUTION
IMPORTANT
Do not use any cutting tool that will extend more than 1” into the
container and cause damage to the unit.
Be sure to keep all shipping materials for the carrier's inspection.