Emc (e – Comtech EF Data CIC-20 LVDS to HSSI User Manual
Page 8

CIC-20 LVDS to HSSI Interface Converter
Revision 0
Preface
MN/CIC20.IOM
vi
T
ELECOMMUNICATIONS
T
ERMINAL
E
QUIPMENT
D
IRECTIVE
In accordance with the Telecommunications Terminal Equipment Directive 91/263/EEC,
this equipment should not be directly connected to the Public Telecommunications
Network.
EMC (E
LECTROMAGNETIC
C
OMPATIBILITY
)
The CIC-20 LVDS to HSSI Interface Converter has been demonstrated, by independent
testing, to comply with the following standards:
Emissions:
EN 55022 Class B - Limits and methods of measurement of radio
interference characteristics of Information Technology Equipment.
FCC P
ART
15 C
LASS
B
Immunity:
EN 50082 Part 1 - Generic immunity standard, Part 1: Domestic,
commercial and light industrial environment.
In order that the CIC-20 LVDS to HSSI Interface Converter continues to comply with
these standards, observe the following instructions:
All 'D' type connectors attached to the unit must have back-shells which provide
continuous metallic shielding. Cable with a continuous outer shield (either foil or
braid, or both) must be used, and the shield must be bonded to the back-shell.
The equipment must be operated with its cover on at all times. If it becomes
necessary to remove the cover, the user should ensure that the cover is correctly re-
fitted before normal operation commences.