Compuprint SP40 plus LAN - Manual (Page 40)

LAN User Manual
MAN10244-01 34
5.1.6.2 Create an Automatic RemoteOutput Queue
1. From the AS/400 command line, enter CRTOUTQ.
2. The following example shows only the parameters you need to specify:
Output
Queue OUTQ USERNAME
Remote system RMTSYS INTNETADR
Remote printer queue RMTPRTQ d1prn
Writer to Autostart AUTOSRTWTR 1
Connection type CNNTYPE IP
Destination type DESTTYP XAUTOQXAIX
Transform TRANSFORM YES
Manufacturer type MFRTYPMDL IBM6400EP
Internet Address INTNETADR 127.000.000.000.
where,
Output queue: enter the name of the AS/400 output queue.
Remote System: enter the host name of your printer or INTNETADR, which then prompts you
to specify the IP address of your printer.
Remote Printer Queue: set to “pr1” through “pr4”. The remote printer queue name must be all lower case,
entered in single quotes.
Writer to Autostart: set the value to “1”.
Connection Type: specify this value as “IP”.
Destination Type: specify “XAUTOQXAIX”.
Transform: specify “YES”.
Manufacturer Type: select a manufacturer type and model.
Select “IBM6400EP” for Epson emulation or “IBM6400PR” or “IBM42023” for IBM Proprinter Internet
Address: specify the IP address of the printer.