Compuprint SP40 plus LAN - Manual (Page 20)

LAN User Manual
MAN10244-01 14
4. The “Add Port” screen appears. Click “Other” selection. Select “Compuprint Print Port “as the port to
use. Click OK button.
5. Select “Compuprint Port 9100”. Click OK button to confirm.
6. In the “Port 9100 settings” screen you can configure this port.
To specify the IP-address see the values set in the INIT IP ADDRESS parameter of the LAN
INTERFACE item in the Power-On Configuration setup you find in the User Manual included in
the Printer Documentation & Drivers CD-ROM.
Then enter a Port Name in the Port Name field. Click OK button to confirm.
If you want to set the default network IP Address and Port name values, click Browse
Network button.