Dixon Black Bear ZTR 34 - Manual (Page 45)

CARE AND MAINTENANCE
45
MOWER DECK REMOVAL
1. Remove mower deck drive belt from clutch. To relieve belt
tension, loosen nut on tensioner eyebolt.
2. Move deck into lowest cut position and support deck with
blocks.
3. Remove nut from each of the four hanger bolts
(suspended from chains). Remove hanger bolts from
deck slots.
4. Remove hardware attaching trailer arms to rear of deck.
5. Slide deck from beneath chassis.
6. Reverse procedure to reinstall deck to chassis.
— Fig. 15 —
Loosen nut to
relieve belt tension
Hanger Bolt
(4 places)
Trailer Arms